In the world of driving exams, the ‘Show me, Tell me’ questions can make or break your confidence. But fear not, as we’re here to equip you with the answers! Whether you’re a new driver or refreshing your knowledge, this blog will provide a concise breakdown of these crucial questions and their solutions. Get ready to impress your examiner and ace those practical tests with our comprehensive guide. Buckle up and let’s dive into the world of ‘Show me, Tell me’ questions!
Contents
Also check – Weird Funny Questions / Funny Questions To Get To Know Someone
Show me tell me questions and answers
Q: Show me how you would check the engine oil level.
A: Open the bonnet, locate the dipstick, remove it, wipe it clean, reinsert it, and then check the oil level against the markings.
Q: Show me how you would check the brake fluid level.
A: Identify the brake fluid reservoir, visually check the fluid level, ensuring it is between the minimum and maximum markings.
Q: Show me how you would check the tire pressure.
A: Use a tire pressure gauge to check the pressure when the tires are cold, and ensure they meet the manufacturer’s recommended levels.
Q: Show me how you would switch on the rear fog lights.
A: Turn on the dipped headlights, then locate and activate the rear fog light switch.
Q: Show me how you would test the brake lights.
A: Ask someone to observe while you press the brake pedal, or use reflective surfaces to check the brake lights’ reflection.
Q: Show me how you would demist the front windshield.
A: Activate the front windshield demister, ensuring the airflow is directed towards the windshield.
Q: Tell me how you would check the power-assisted steering is working before starting a journey.
A: Gently apply pressure to the steering wheel while the engine is off, and it should feel light and responsive.
Q: Tell me how you would check the headlights and tail lights are working.
A: Turn on the lights, walk around the vehicle, and visually inspect each light to ensure they are functioning correctly.
Q: Show me how you would clean the windscreen using the windscreen washer and wipers.
A: Activate the windscreen washer function, and the wipers will clear the sprayed fluid from the windscreen.
Q: Show me how you would set the demister controls to clear all the windows effectively.
A: Adjust the airflow direction to include the front and rear windshields, activate the front windshield demister, and adjust the fan speed accordingly.
Q: Show me how you would check the horn is working.
A: Press the horn and listen for a clear and audible sound.
Q: Show me how you would check the indicators are working.
A: Activate the indicators (both left and right) and visually check that all indicator lights are functioning.
Q: Show me how you would check the handbrake for excessive wear.
A: Apply the handbrake and ensure it secures the vehicle, then release it and check that it releases smoothly without any excessive wear or sticking.
Q: Show me how you would check the ABS (Anti-lock Braking System) is working.
A: Start the engine, ensure the ABS warning light comes on briefly, and then goes off after a few seconds.
Q: Show me how you would check the rear reflectors are clean and not damaged.
A: Inspect the rear reflectors for cleanliness and any signs of damage, ensuring they are visible and unobstructed.
Q: Show me how you would check the engine coolant level.
A: Identify the coolant expansion tank, visually check the level against the markings, and ensure it is between the minimum and maximum levels.
Q: Show me how you would operate the heated rear screen.
A: Locate and activate the heated rear screen switch.
Q: Show me how you would check the operation of the brake lights.
A: Ask someone to observe while you press the brake pedal, or use reflective surfaces to check the brake lights’ reflection.
Q: Show me how you would check the condition of the tires.
A: Visually inspect each tire for any signs of damage, bulges, cuts, or uneven wear.
Q: Show me how you would switch the headlights from dipped to main beam.
A: Activate the headlights and then switch to the main beam using the appropriate control.
Q: Show me how you would check the operation of the hazard warning lights.
A: Activate the hazard warning lights and ensure all indicator lights flash simultaneously.
Q: Show me how you would check the condition of the brake pads.
A: Visually inspect the brake pads through the wheel spokes for any signs of wear or damage.
Q: Show me how you would check the operation of the ABS (Anti-lock Braking System).
A: Start the engine, ensure the ABS warning light comes on briefly, and then goes off after a few seconds.
Q: Show me how you would clean the windscreen using the windscreen washer and wipers.
A: Activate the windscreen washer function, and the wipers will clear the sprayed fluid from the windscreen.
Q: Show me how you would set the demister controls to clear all the windows effectively.
A: Adjust the airflow direction to include the front and rear windshields, activate the front windshield demister, and adjust the fan speed accordingly.
Q: Show me how you would operate the front and rear fog lights.
A: Identify and activate the front fog light switch and the rear fog light switch separately.
Q: Show me how you would check the condition of the battery.
A: Visually inspect the battery for any signs of corrosion, leakage, or loose connections.
Q: Show me how you would check the condition of the suspension components.
A: Visually inspect the suspension components for any signs of damage, corrosion, or leakage.
Q: Show me how you would check the condition of the wiper blades.
A: Inspect the wiper blades for any signs of damage, such as splits or cracks.
Q: Show me how you would adjust the head restraint to ensure it provides the best protection in the event of a crash.
A: Adjust the head restraint so that it is at least at the level of your ears and as close to the back of your head as possible, providing maximum protection.
As we reach the end of our blog journey, you’re now armed with the essential knowledge to tackle those ‘Show me, Tell me’ questions with confidence. Remember, preparation is key, so take the time to study and practice the answers we’ve provided. With a solid understanding of your vehicle’s mechanics and safety features, you’ll impress your examiner and demonstrate your readiness to hit the road. Keep practicing, stay calm during your driving test, and remember that knowledge is power. Good luck on your driving journey!
Show me tell me quiz questions answers
Are you preparing for your driving test and want to ensure you have a strong grasp of the essential vehicle maintenance knowledge? Look no further! In this blog post, we’ll dive into the commonly asked “Show Me, Tell Me” quiz questions, which test your understanding of basic car maintenance. Whether you’re a new driver or looking to refresh your memory, these questions and answers will help you feel confident and ready to conquer the roads.
Q: Show me how you would check the engine oil level.
A: Open the car bonnet, locate the engine oil dipstick, pull it out, wipe it clean, reinsert it fully, and then check the oil level against the markings.
Q: Show me how you would check the brake fluid level.
A: Identify the brake fluid reservoir, usually located under the bonnet, and visually check the fluid level against the markings on the reservoir.
Q: Show me how you would check the tyre pressures.
A: Use a reliable pressure gauge to check the tyre pressures when they are cold, ensuring they meet the manufacturer’s recommended levels as stated in the vehicle manual.
Q: Show me how you would check the headlights and tail lights are working.
A: Turn on the ignition, activate the lights, walk around the vehicle, and visually inspect each light to ensure they are functioning correctly.
Q: Show me how you would check the power-assisted steering is working.
A: Start the engine, apply gentle pressure to the steering wheel, and ensure it moves smoothly and without excessive resistance.
Q: Tell me how you would check the horn.
A: Press the horn symbol on the steering wheel and listen for a clear and audible sound.
Q: Show me how you would check the windscreen washer fluid level.
A: Locate the windscreen washer fluid reservoir, typically under the bonnet, and check the level visually. Refill if necessary.
Q: Show me how you would clean the windscreen using the washers and wipers.
A: Operate the windscreen washers using the controls, and observe the wipers to ensure they effectively clear the fluid from the windscreen.
Q: Show me how you would check the handbrake for excessive wear.
A: Apply the handbrake, release it, and then apply it again, ensuring it holds the vehicle securely without excessive movement or slippage.
Q: Show me how you would check the condition of the tyre tread.
A: Examine the tread depth using a tread depth gauge or the built-in tread wear indicators, ensuring it meets the legal requirement of at least 1.6mm across the central three-quarters of the tyre.
Q: Tell me how you would check the operation of the anti-lock braking system (ABS).
A: Start the engine, drive a short distance, and ensure the ABS warning light illuminates upon ignition and goes off after a few seconds.
Q: Show me how you would demist the front windscreen.
A: Activate the front windscreen demister function, adjust the temperature, fan speed, and airflow direction to clear the condensation or mist from the windscreen.
Q: Tell me how you would know if there is a problem with the anti-lock braking system (ABS).
A: The ABS warning light will illuminate on the dashboard if there is a fault with the system.
Q: Show me how you would check the condition and security of the seatbelts.
A: Physically inspect the seatbelts, ensuring they are not frayed, damaged, or excessively worn, and that they fasten securely.
Q: Show me how you would check the operation of the brake lights.
A: Turn on the ignition, press the brake pedal, and check that the brake lights illuminate at the rear of the vehicle.
Q: Show me how you would check the operation of the indicators.
A: Activate the indicator stalk in both directions and walk around the vehicle to verify that all indicators are functioning correctly.
Q: Show me how you would test the parking brake (handbrake) for effectiveness.
A: Apply the handbrake, gently press the accelerator, and ensure the handbrake holds the vehicle securely, preventing any movement.
Q: Show me how you would check the operation of the hazard warning lights.
A: Activate the hazard warning light switch, and observe that all indicator lights on the vehicle flash simultaneously.
Q: Show me how you would check the operation of the dipped headlights.
A: Turn on the ignition and activate the dipped headlights, ensuring they are functioning correctly and providing adequate illumination.
Q: Show me how you would check the condition of the exhaust system.
A: Visually inspect the exhaust system for any signs of damage, excessive rust, or leaks, ensuring all parts are securely fitted and functioning properly.
In conclusion, the “Show Me, Tell Me” quiz questions are an integral part of the driving test, designed to assess your understanding of crucial vehicle maintenance. By familiarizing yourself with these questions and their corresponding answers, you’ll gain the knowledge and confidence needed to tackle the exam. Remember to practice explaining and demonstrating the various vehicle components, as this will not only impress the examiner but also ensure your safety on the road. Stay prepared, stay informed, and best of luck as you embark on your driving journey!
Easy Show me tell me questions
Keeping your car in good working condition is essential for both safety and performance. However, knowing where to start when it comes to basic car maintenance can be overwhelming for beginners. That’s why understanding the easy “Show me tell me” questions can provide a great foundation for maintaining your vehicle. In this blog post, we will explore these simple questions and how they can help you take care of your car effortlessly.
Show me how you would check the engine oil level.
Show me how you would check the coolant level.
Show me how you would check the brake fluid level.
Show me how you would check the power steering fluid level.
Show me how you would check the windscreen washer fluid level.
Show me how you would check the condition and tension of the drive belts.
Show me how you would check the condition of the tires, including the tire pressure.
Show me how you would check the operation of the headlights and tail lights.
Show me how you would check the operation of the brake lights.
Show me how you would check the operation of the horn.
Show me how you would check the condition and operation of the wiper blades.
Show me how you would check the operation of the indicators (turn signals).
Show me how you would check the condition of the brake pads or shoes.
Show me how you would check the condition and operation of the steering system.
Show me how you would check the condition and operation of the suspension system.
Show me how you would check the condition and operation of the exhaust system.
Show me how you would check the condition and operation of the battery.
Show me how you would check the condition and operation of the seat belts.
Show me how you would check the condition and operation of the windscreen wipers.
Show me how you would check the condition and operation of the central locking system.
Mastering the Easy Show me tell me questions is the first step toward becoming a confident car owner who can handle basic maintenance tasks with ease. By regularly checking the essential components and understanding their functions, you can ensure the longevity and optimal performance of your vehicle. Remember, a little effort in maintaining your car can go a long way in keeping you safe on the road and saving you from expensive repairs. So, don’t hesitate to delve into these easy questions and take charge of your car’s well-being today!
